Howto Hardware Factory Reset

From berofix - professional SIP gateway
Jump to: navigation, search
 
Line 13: Line 13:
  
 
*4. In case of a Box Power up the device or in case of a card plug the card in your computer and power up the device.
 
*4. In case of a Box Power up the device or in case of a card plug the card in your computer and power up the device.
*5. After you power up the device the berofix should be reachable again with the default IP address 10.0.0.2. Open your Browser with this new address and wait until you get a response from the berofix (this could take a couple of minutes. see picture below).
+
*5. After you power up the device the berofix should be reachable again with the default IP address 10.0.0.2. or a new IP-address. Open your Browser with the address and wait until you get a response from the berofix (this could take a couple of minutes. see picture below).
 
[[Image:Bf_HWReset2.png]]
 
[[Image:Bf_HWReset2.png]]
 
*6. Upload a new Firmware (see picture above).
 
*6. Upload a new Firmware (see picture above).

Latest revision as of 12:44, 25 April 2016

Personal tools