View source for Berofix userapp ressources
From berofix - professional SIP gateway
beroFix is an embedded device and has therefore only limited ressources. Especially compared to a Server, berofix is rather small. But beroFix has also some advantages compared to a Server and thanks to it's limited ressources it has no moving part inside and uses only very few power (<5W) this makes beroFix ideal for applications that don't need to much power but must run forever. In Terms of Hardware beroFix has: * Dualcore CPU (CSP + MSP) * DSP * 64 MB RAM * 32 MB Flash * 2 Expansion Slots for additional Lineinterface Modules (BRI/PRI/Analog/GSM available) * 100Mbit Ethernet Network Connection * PCM Interface to couple 2 beroFixes Currently the beroFix rootfs + appfs use: max. 44MB Ram max. 24MB Flash So there is currently still: '''8MB Flash''' and about '''20MB Ram''' left for the userappfs. All 3 Software Partitions (rootfs/appfs/userappfs) are only mounted read-only. There is an additional "conf" Partition with 4 MB Ram (3MB free) which is read-/writeable mounted. This partition is also accessible to the userappfs, so that it can store data here.
Berofix userapp ressources
Retrieved from "
What links here
About berofix - professional SIP gateway