BerofixDocuV3

@@ Line 1,025: / Line 1,025: @@
 '''Match Type'''
-:The 'Match type' give you the possibility to choose which part of the from or To header the beroFix should use to match. The match type has the following options and meanings:
+The 'Match type' give you the possibility to choose which part of the from or To header the beroFix should use to match.
+''Note:'' The settings only match if you set the Match type in the relevant dialplan to <Default SIP account>.
+It has the following options and meanings:
   IP Address: By choosing this option, the IP-address from where the call is originated has to match to the 'Server address' of the SIP account, which has been chosen in the 'Server address' field.
@@ Line 1,031: / Line 1,036: @@
   To User: additionaly to the IP-address choosen in the server address field, the beroFix will match if the user part of the To Header conforms with the 'user' field of the SIP-account.
+ Contact User: matches if the contact header conforms with the user field of the SIP-account.
   Manual: with this option, you can set a manual address (IP-address) which should be used instead of an existing SIP-account. Matching is the same like described in 'IP Addres' above.

Revision as of 18:19, 26 November 2015