BerofixDocuV3
From berofix - professional SIP gateway
(→PSTN) |
(→Preferences) |
||
| Line 1,423: | Line 1,423: | ||
'''Hostname''' | '''Hostname''' | ||
Hostname of the beroNet gateway | Hostname of the beroNet gateway | ||
| − | |||
'''Advanced''' | '''Advanced''' | ||
| + | |||
'''MTU size''' | '''MTU size''' | ||
Maximum transmission unit. A value between 0-1500. Default is 1500. | Maximum transmission unit. A value between 0-1500. Default is 1500. | ||
| Line 1,454: | Line 1,454: | ||
If you want the beroFix device to get it's systemtime from ISDN, you can do so by enabling this option. Y | If you want the beroFix device to get it's systemtime from ISDN, you can do so by enabling this option. Y | ||
You have to choose a specific port. All incoming ISDN calls are checked for the time and if it differs from the current system time, the system time is set to the new time. | You have to choose a specific port. All incoming ISDN calls are checked for the time and if it differs from the current system time, the system time is set to the new time. | ||
| + | |||
| + | |||
| + | ===Provisioning=== | ||
| + | |||
| + | [[image:Preferences_provisioning.PNG]] | ||
| + | |||
| + | for using the provisioning feature, you can choose either TFTP or HTTP provisioning. | ||
| + | |||
| + | '''TFTP / HTTP Host''' | ||
| + | Enter the IP-address of the respective TFTP / HTTP host. (The host that provides the configuration. ) | ||
| + | |||
| + | '''TFTP / HTTP URL''' | ||
| + | Enter the URL of the configuration file in question of the respective TFTP / HTTP server. | ||
| + | |||
| + | Use boot TFTP / HTTP | ||
| + | If this option is activated, beroFix will try to start provisioning process during the boot phase. | ||
| + | |||
| + | |||
| + | ===beroFos Heartbeat=== | ||
| + | Please read [[berofosDocu|beroFos]] manual for more information! | ||
| + | |||
| + | [[image:Preferences_berofos_heartbeat.PNG]] | ||
| + | |||
| + | '''IP-Address''' | ||
| + | If you want to use the beroFos heartbeat feature, you need to enter the IP-address of the beroFos device here. | ||
| + | '''MAC address''' | ||
| + | If you want to use the beroFos heartbeat feature, you need to enter the MAC-address of the beroFos device here. | ||
| + | '''Interval (sec.)''' | ||
| + | Here you can set the interval in which the beroFix device sends a heartbeat signal to the beroFos device. | ||
| + | '''Heartbeat on boot''' | ||
| + | Enable this option if you want the beroFix device to send a heartbeat during and after booting automatically. (Alternatively you can also manually start the heartbeat) | ||
| + | '''beroFos heartbeat state''' | ||
| + | Activates / deactivates the heartbeat process | ||
== Management == | == Management == | ||
