BerofixDocuV3

From berofix - professional SIP gateway
Jump to: navigation, search
(PSTN)
(Preferences)
Line 1,423: Line 1,423:
 
'''Hostname'''
 
'''Hostname'''
 
  Hostname of the beroNet gateway
 
  Hostname of the beroNet gateway
 
  
 
'''Advanced'''
 
'''Advanced'''
 +
 
'''MTU size'''
 
'''MTU size'''
 
  Maximum transmission unit. A value between 0-1500. Default is 1500.
 
  Maximum transmission unit. A value between 0-1500. Default is 1500.
Line 1,454: Line 1,454:
 
  If you want the beroFix device to get it's systemtime from ISDN, you can do so by enabling this option. Y
 
  If you want the beroFix device to get it's systemtime from ISDN, you can do so by enabling this option. Y
 
  You have to choose a specific port. All incoming ISDN calls are checked for the time and if it differs from the current system time, the system time is set to the new time.
 
  You have to choose a specific port. All incoming ISDN calls are checked for the time and if it differs from the current system time, the system time is set to the new time.
 +
 +
 +
===Provisioning===
 +
 +
[[image:Preferences_provisioning.PNG]]
 +
 +
for using the provisioning feature, you can choose either TFTP or HTTP provisioning.
 +
 +
'''TFTP / HTTP Host'''
 +
Enter the IP-address of the respective TFTP / HTTP host. (The host that provides the configuration. )
 +
 +
'''TFTP / HTTP URL'''
 +
Enter the URL of the configuration file in question of the respective TFTP / HTTP server.
 +
 +
Use boot TFTP / HTTP
 +
If this option is activated, beroFix will try to start provisioning process during the boot phase.
 +
 +
 +
===beroFos Heartbeat===
 +
Please read [[berofosDocu|beroFos]] manual for more information!
 +
 +
[[image:Preferences_berofos_heartbeat.PNG]]
 +
 +
'''IP-Address'''
 +
If you want to use the beroFos heartbeat feature, you need to enter the IP-address of the beroFos device here.
 +
'''MAC address'''
 +
If you want to use the beroFos heartbeat feature, you need to enter the MAC-address of the beroFos device here.
 +
'''Interval (sec.)'''
 +
Here you can set the interval in which the beroFix device sends a heartbeat signal to the beroFos device.
 +
'''Heartbeat on boot'''
 +
Enable this option if you want the beroFix device to send a heartbeat during and after booting automatically. (Alternatively you can also manually start the heartbeat)
 +
'''beroFos heartbeat state'''
 +
Activates / deactivates the heartbeat process
  
 
== Management ==  
 
== Management ==  

Revision as of 12:32, 20 November 2015

Personal tools